Skip to main content

Tune Mode

Transmit a low powered carrier, and displays the SWR.

  1. The script saves the current mode, and power level*
  2. Drops the power to 1 W, and switches mode to CW.
  3. Enters TX mode and displays the SWR.
  4. When the Stop(Run) button is pressed, switch back to RX and restore mode and power level.

Notes​

  • *QMX Firmware version 1.03.002 has a bug with reading the Max. PA Voltage, therefor until it is resolved this script returns the Max. PA Voltage to 5V when done, rather than the initial Max V. Once you have installed it, you can edit the script and change to your preferred Max. V. setting.
  • SWR power is set at 1 V. You will probably want to change this to 5 V or so once the script is added to a task.

Source​