Skip to main content

Community Script

Tune SWR - Quick

Displays the SWR for several frequencies in one go.

🏷️ ≥1.4.3

This task will retrieve the SWR for a list of frequencies, then display them in the task description.

completed task

Configuration​

Frequencies may be defined in one of two places, the script itself, or in one of the radio's message slots.

Defining frequencies in the script​

  • At the top of the script, set the FREQ_SRC to "SCRIPT";
  • Edit the FREQ_LIST variable to contain the frequencies you wish to cycle through.

E.g. to cycle through 7.032 MHz, 14.044 MHz and 21.044 MHz.

const FREQ_SRC = "SCRIPT"; // MSG | SCRIPT
const FREQ_LIST = [
	7032000,
	14044000,
	21044000
];

Definging frequencies in a message slot​

  • At the top of the script, set the FREQ_SRC to `"MSG";
  • Edit the message slot to contain the frequencies you wish to cycle through. This is most easily done via the radio's terminal.

E.g. to load frequencies from message slot 10.

const FREQ_SRC = "MSG"; // MSG | SCRIPT
const MESSAGE_INDEX = 10;

The message slot should contain frequencies seperated by the pipe character |.
For example, to cycle through 7.032 MHz, 14.044 MHz and 21.044 MHz, the message slot should contain 7032000|14044000|21044000.